drywall installer
Posted on June 26, 2026 by a licensed third-party for Employer details Guns and Biceps Construction Ltd.
Job details
Education: Secondary (high) school graduation certificate. Tasks: Read blueprints, drawings and specifications to determine work requirements . Apply, level and smooth coats of plaster. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Experience: 7 months to less than 1 year.- Location Lethbridge, ABT1J 0J9
- Work location On site
- Salary$36.00HOUR hourly / 40 hours per week
- Terms of employment Permanent employmentFull time
- Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3608881
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
7 months to less than 1 year
On site
Work must be completed at the physical location. There is no option to work remotely.
Responsibilities
Tasks
- Read blueprints, drawings and specifications to determine work requirements
- Apply, level and smooth coats of plaster
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Position and secure sheets to metal or wooden studs or joists
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
Who can apply for this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada
- other candidates, with or without a valid Canadian work permit
Advertised until
2026-07-10
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
Page details
- Date modified: