drywall finisher
Posted on May 25, 2026 by a licensed third-party for Employer details NGE Solution
Job details
Education: Secondary (high) school graduation certificate. Work setting: Various locations. Tasks: Read blueprints, drawings and specifications to determine work requirements . Apply successive coats of compound and sand seams and joints. Clean and prepare surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Smooth out excess compound and allow coat to dry. Tape over joints using taping machine and embed tape in compound. Install corner beads and wire mesh around beams to which plaster is to be applied. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Prepare wall and ceiling layouts. Security and safety: Criminal record check. Personal suitability: Team player. Experience: 3 years to less than 5 years. Employment terms options: Morning. Day.- Location Richmond Hill, ONL4C 6E5
- Work location On site
- Salary$33.00 to $36.00HOUR hourly (To be negotiated) / 30 to 40 hours per week
- Terms of employment Permanent employmentFull time
- Morning, Day
- Starts as soon as possible
- vacancies 2 vacancies
- Source Job Bank #3583201
Overview
Languages
English
Education
- Secondary (high) school graduation certificate
Experience
3 years to less than 5 years
On site
Work must be completed at the physical location. There is no option to work remotely.
Work setting
- Various locations
Responsibilities
Tasks
- Read blueprints, drawings and specifications to determine work requirements
- Apply successive coats of compound and sand seams and joints
- Clean and prepare surfaces
- Cut and install metal corner beads to protect exterior corners
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Finish corners and angles and create decorative designs in finish coat, if required
- Measure, cut, fit and install drywall sheets
- Mix plaster ingredients to desired consistency
- Mould and install ornamental plaster panels, cornices and trim
- Smooth out excess compound and allow coat to dry
- Tape over joints using taping machine and embed tape in compound
- Install corner beads and wire mesh around beams to which plaster is to be applied
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Prepare wall and ceiling layouts
Additional information
Security and safety
- Criminal record check
Personal suitability
- Team player
Who can apply for this job?
You can apply if you are:
- a Canadian citizen
- a permanent resident of Canada
- a temporary resident of Canada with a valid work permit
Do not apply if you are not authorized to work in Canada. The employer will not respond to your application.
Advertised until
2026-06-08
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
Page details
- Date modified: